by admin | Aug 14, 2019 | Automation
5 Reasons why the YRG Cartesian Robot may be right for you: Point 1. Use of 4-row circular arc groove type 2-point contact achieves high durability. When compared to the 2-row Gothic arch type 4-point contact guide, the robot provides features that it does not stop...
by admin | Aug 13, 2019 | Automation
The Kenos® KCS gripper consists of a separate pump unit that integrates modular vacuum generation in the smallest of spaces with a gripper unit. Both are connected by a quickchange system. The entire unit can be attached to all common cobot models with a respective...
by admin | Aug 12, 2019 | Automation
MiR1000Designed to automate and optimize the internal transportation of heavy duties and pallets. With a payload of 1000 kg, this is MiR’s most powerful robot, and even in highly dynamic environments it can transport heavy loads without any exterior safety measures...
by admin | Jun 27, 2019 | Automation
The only industrial handheld barcode reader that offers Industrial Ethernet communication and liquid lens technology. Dataman 8050 Series Handheld Barcode Reader Decodes well-marked direct part mark (DPM) and label-based codes in harsh factory floor environments....
by admin | Jun 26, 2019 | Automation
Combining the power of an In-Sight vision system with the simplicity and affordability of a vision sensor. Ideal for solving error-proofing applications, these vision sensors set new standards for value, ease of use and flexibility thanks to a powerful combination of...
by admin | Jun 18, 2019 | Automation
NEFF Demo Expo! is back! Join the NEFF Automation Experts for a one-day event to showcase the quality automation products that NEFF and its partners have to offer. Many manufacturers will be there to demonstrate the latest innovations in automation technology,...
by admin | Jun 14, 2019 | Automation
Introducing Pneu-Connect X2 With Freedrive: Seamless Integration of PHD Grippers to Universal Robots Benefits: Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots Couples directly to the robot arm tool port enabling...
by admin | May 9, 2019 | Automation
Flying leads, pigtails, single-ended cordsets Balluff‘s line of connectivity solutions complements the entire line of Balluff’s automation components portfolio and more. Our connectivity portfolio assures reliable operations that everyone has come to expect from...
by admin | May 9, 2019 | Automation
Ergonomic solutions that are good for business and great for people Reducing injury and increasing productivity are often accomplished with the aid of ergonomic lifting devices. This type of equipment allows one or two operators to lift, move and manipulate large and...
by admin | Apr 16, 2019 | Automation
Built on the foundation of long-life products for industrial automation, PHD Optimax® products are actuators designed to meet machine builders’ performance requirements at a competitive price. These economical, efficient, and reliable actuators provide customers with...
by admin | Apr 9, 2019 | Automation
End-of-Arm Tooling: Robotic Gripper Systems You don’t need to be an expert to find the right Robotic Gripper System for you. We can help. Robotiq Hand-E Gripper Robotiq’s Hand-E Gripper is simple to integrate in your production environment and easy for workers...
by admin | Apr 9, 2019 | Automation
With twice the computing power of conventional readers in its class, the DataMan 370 delivers faster decode speeds for greater throughput per facility, even when applications have multiple codes and symbologies. 2X read performance and power DataMan 370 series barcode...
by admin | Apr 9, 2019 | Automation
If you are an electrical engineer, and you work on industrial systems with PLCs and RTUs, and cable ducts jammed with copper wire bundles, you may be looking for an alternative. Enter the IO-Link – an alternative method to field wiring that creates a “modular”...
by admin | Mar 7, 2019 | From Around the Web
The MAC Liquid Bullet Valve release includes several different protocol options in addition to several modules to ensure a complete system package. With fast response times, reliable shifting forces and repeatable results – due to its patented balanced design – the...
by admin | Feb 27, 2019 | Automation
The In-Sight® 9912 is Cognex’s first standalone, ultra-high-resolution, area scan vision system. With its ability to acquire and process exceptionally detailed images, the 12 megapixel (MP) 9912 delivers high accuracy part location, measurement, and inspection over a...
by admin | Feb 27, 2019 | Automation
High Performance. Long Life. The MAC® Pulse Valve series is designed to be a direct drop-in replacement for existing pulse technology. The MAC® solution utilizes a long life, bonded-spool design, instead of the traditional diaphragm style. MAC® also uses a balanced...
by admin | Feb 15, 2019 | From Around the Web
For the first time ever, hire a robot for your factory like you would hire an employee. Manufacturing companies of all sizes are experiencing a labor shortage. Large manufacturing operations are adapting by turning to investments in automation to combat this shift....
by admin | Feb 15, 2019 | From Around the Web
With the OnRobot collaborative End-of-Arm Tooling, automation is now accessible and profitable for all manufacturers. The fast installation and simple programming of the grippers and sensors will save time on installation and production cycles, thus pushing up...
by admin | Feb 15, 2019 | From Around the Web
The U.S. passed a signifcant milestone in the spring of 2018. For the frst time ever, the U.S. Bureau of Labor Statistics (BLS) reported more job openings than people available to fill them. While exceptionally low unemployment may seem like a boon to the country,...
by admin | Nov 13, 2018 | Industry News
AKD2G Servo Drive Twice the Power Density! The AKD2G are planned to launch in December 2018. AKD2G features dual-axis, expandable I/O (without increasing the size), removable memory, dual-channel STO, and the first drive-resident graphic display in the industry. The...
by admin | Nov 7, 2018 | Automation, Industry News, Pneumatics
We are pleased to announce the release of the MI/O-67® Fieldbus Platform. Our initial release includes several different protocol options in addition to several modules to ensure a complete system package. Key Benefits MAConnect® MI/O-67® will utilize existing...
by admin | Oct 18, 2018 | Industry News, Robotics
Combined with a Pick-it M-HD camera, the Pick-it 2.0 system is 30 times more accurate and can detect objects that are 10 times smaller than before. With Pick-it 2.0, we take the future of your production seriously. Set it up once with our intuitive web interface and...
by admin | Oct 18, 2018 | Robotics
MiR500 is designed to automate the transportation of pallets and heavy loads across industries. With a payload of 500 kg, speed of 2 m/sec and a footprint of 1350×920 mm, MiR500 is the largest, most powerful, fastest and robust collaborative, autonomous mobile...
by admin | Oct 18, 2018 | Automation, Industry News, Robotics, Vision Systems
The Cognex In-Sight 2D Robot Guidance plugin greatly simplifies the communication, hand eye calibration, and vision guided robotics development between a UR robot and Cognex 2D Vision System. Take advantage of Cognex’s world class vision tools for any robot...
by admin | Aug 17, 2018 | Automation, Pneumatics, Robotics
A new accessory for seamless integration of pneumatic grippers on collaborative robots is available from PHD, Inc. Pneu-ConnectTM connects directly to the tool port on the robot arm making it easy to attach a PHD pneumatic gripper to a Universal Robot (UR) brand...
by admin | Aug 17, 2018 | Automation, Neff News, Vision Systems
When a Tier 1 supplier of automotive exhaust system components turned toward automation for quality inspection, it reached out to NEFF to develop a machine vision system that verifies not only the integrity of a specific part, but also its proper assembly to...
by admin | Aug 17, 2018 | Industry News, Robotics
Universal Robots e-Series cobots exemplify all that we believe in productivity, adaptability and reliability. Equipped with intuitive programming, versatile use and an almost endless list of opportunities for add-ons, the e-Series is able to complement production...
by admin | May 21, 2018 | Guarding & Framing
If you have machine guards that don’t adequately protect your personnel and equipment from risk and don’t comply with all OSHA and government regulations, it’s time to drop them… and find a better solution. Custom guards can be configured to...
by admin | May 10, 2018 | From Around the Web
Meet some kids we’ll probably all be working with (or for) someday. They’re young, energetic, uber-smart, and quite-frankly, a little crazy. But when it comes to robotics, they rule. They are the Trisonics, members of Allendale Robotics, a student robotics program...
by admin | May 10, 2018 | Automation, Industry News, Motion Control, Neff News, Pneumatics, Robotics, Sensors
That’s who we work with. A bunch of showoffs. Always showing off cool products and services. So we figured we might as well give them a forum in which to do it. (We’d rather have them doing it under our roof than out in the streets somewhere.) It’s...
by admin | May 10, 2018 | Robotics
As robotics become more important in manufacturing, the NEFF newsletter staff decided to find out more about the topic by going straight to the source. NEFF: Good afternoon. Statistics show that manufacturers are having difficulties retaining employees....
by admin | Apr 18, 2018 | Robotics
When designing an automated process that requires moving objects or performing repetitive functions, you’re going to need robotic arms. But not just any robotic arms… the RIGHT arms. Making the right choice can make your process go smoother and faster....
by admin | Apr 18, 2018 | Neff News
Of course you do. Who doesn’t? And in our industry there are so many cool things to see. So we developed a series of events where great manufacturers get together and show off their cool automation stuff, and people like you (who want to see cool things) come...
by admin | Apr 17, 2018 | Robotics
a). The fourth industrial revolution b). Some term the German government made up c). A future where robots work without humans d). “Smart” factories and intelligent production systems e). The “Industrial Internet of Things” f). Marketing...
by admin | Apr 17, 2018 | Industry News
In Pennsylvania, there’s a group of people who just won’t stop talking about robots. And we’re listening to them. NEFF is partnering with groups like ARM (Advanced Robotics for Manufacturing) to explore how robotics can enhance the future of American...
by admin | Mar 13, 2018 | From Around the Web
by Anthony Shave, NEFF Technical Sales Representative The cement industry is a VERY dusty business. And all that dust can be murder on equipment – and your career if you’re in charge of keeping the plant running at optimal production. For those of you non-cement...
by admin | Mar 13, 2018 | From Around the Web
Warning: If you are not an electrical engineer, this article may make you feel a little Dopey. However, if you ARE an electrical engineer, and you work on industrial systems with PLCs and RTUs, and cable ducts jammed with copper wire bundles, then you are more likely...
by admin | Mar 13, 2018 | From Around the Web
Get ready to expand the capabilities of your robots and cobots! Pickit has introduced a plug-and-play solution that enables your robot to pick and place a wide range of products in many different applications. Better yet, it is simple to use, requires no programming,...
by admin | Mar 13, 2018 | From Around the Web
We love working with customers starting at the concept stage. When we can bring our automation expertise and combine it with our customer’s industry expertise, the results are usually spectacular. And here’s another great example – our customer...
by admin | Apr 24, 2017 | Job Postings, Technical Sales
We need an Account Manager who can use your engineering/technical background to take great care of our existing customers, help us find and build relationships with new customers, and help our NEFF team continue to grow. In return for providing our customers with the...
by admin | Oct 31, 2015 | Automation, Motion Control, Neff News
Wanna see automation so advanced it’s scary? Watch this:...
by admin | Aug 17, 2015 | Automation
CyberFence proactively delivers the most advanced cyber security optimized for industrial networks that protects against major vulnerabilities found in DNP3 systems. Read the FULL ARTICLE here: First and Only Cyber Security Solution for DNP3 Source:...
by admin | Aug 17, 2015 | Automation
Cliff William joined the firm in an advisory role to assist in expanding their capacity in Maintenance and Reliability consulting and training. Read the FULL ARTICLE here: Cliff Williams to advise People and Processes Source: Automation.com
by admin | Aug 17, 2015 | Automation
Emerson signs 10-year agreement with BP for enhanced oil and gas project execution and operational reliability. Read the FULL ARTICLE here: Emerson to supply BP with automation equipment and services Source: Automation.com
by admin | Aug 17, 2015 | Automation
The office houses sales, customer service, and training departments, along with areas for spare parts and product demonstration. Read the FULL ARTICLE here: ATI industrial automation opens office in Queretaro, Mexico Source: Automation.com
by admin | Aug 17, 2015 | Automation
By Bill Lydon, Editor Automation.com conducted a PLC/PAC Automation Experience survey with the goal to gather vendor ratings based on user experiences. The survey also asked questions on specific industry topics, including what are automation’s biggest problems. This...
by admin | Aug 3, 2015 | Automation, Industry News
The latest version of LabVIEW delivers speed improvements, development shortcuts, and debugging tools to empower developers to efficiently interact with the systems they create. Read the FULL ARTICLE here: National Instruments announces LabVIEW 2015 system design...
by admin | Aug 3, 2015 | Automation, Industry News
Training program teaches customers how to maintain and modify their SmartCart Automatic Guided Carts. Read the FULL ARTICLE here: Jervis B. Webb announces SmartCart training program Source: Automation.com
by admin | Aug 3, 2015 | Automation, Industry News
The IP67 rated power supplies mount directly on machines or as freestanding components and need no enclosures. Read the FULL ARTICLE here: Emerson Industrial announces SolaHD SCP-X power supplies Source: Automation.com
by admin | Aug 3, 2015 | Automation, Industry News
The eddy current position sensor has a 2mm measuring range, and a resolution of 4µm. Read the FULL ARTICLE here: Micro-Epsilon releases eddyNCDT 3001 position sensor Source: Automation.com
by admin | Aug 3, 2015 | Automation, Industry News
Vapor Systems Technologies uses a Unitronics Vision350 PLC +HMI to test gas pump nozzles through 1,000,000 cycles. Read the FULL ARTICLE here: PLC runs gas pump tester Source: Automation.com
by admin | Aug 2, 2015 | Automation, Industry News
By Ken Ball Programmable Logic Controllers (PLCs) were more of a technology evolution than a radical development. A noteworthy aspect about the origin was that quite similar concepts were pursued by three separate companies—nearly concurrently but unknown to each...
by admin | Jul 31, 2015 | Automation, Industry News
The digitally compensated Model 136/236/336 Series can measure differential pressures as low as 20” WCD and line pressures up to 1000 PSID (69 BAR), with accuracies of up to ±0.05% FSO. Read the FULL ARTICLE here: GP:50 releases Model 136/236/336 DP transducers...
by admin | Jul 31, 2015 | Automation, Industry News
The 2 Channel TR-71nw supports automated, error-free data collection, remote monitoring and alerting with a simple Ethernet LAN connection. Read the FULL ARTICLE here: T&D introduces TR-71nw temperature data logger Source: Automation.com
by admin | Jul 31, 2015 | Automation, Industry News
The configurable 19-inch rack-mount PCs come in both 2U and 4U form factors. Read the FULL ARTICLE here: Phoenix Contact adds rack-mount industrial PCs Source: Automation.com
by admin | Jul 31, 2015 | Automation, Industry News
V-551 comes equipped with an integrated absolute-measuring, 2nm resolution encoder and an ironless magnetic linear motor. Read the FULL ARTICLE here: Physik Instrumente releases V-551 motorized linear translation stage Source: Automation.com
by admin | Jul 31, 2015 | Automation, Industry News
By Tom Bonine, National Metal Fabricators Robotic welding is highly cost-effective, especially for longer production runs where programming time can be amortized over a large number of pieces. Read the FULL ARTICLE here: Robotic Welding Advantages Source:...
by admin | Jul 30, 2015 | Automation
aeShield and aeFacilitator enable different personnel/groups throughout organizations to transfer data to support the entire process safety lifecycle from hazard analysis all the way through to Management of Change. Read the FULL ARTICLE here: AESolutions updates...
by admin | Jul 30, 2015 | Automation
Rosemount 3051S wireless pressure transmitters use energy harvesting to provide external power, helping operators decrease maintenance time and costs Read the FULL ARTICLE here: Emerson adds vibration energy harvester to wireless pressure transmitters Source:...
by admin | Jul 30, 2015 | Automation
MV drive revenues declined by more than 10% in 2014 to $2.5 billion as increased competition and lower demand eroded prices, says HIS. Read the FULL ARTICLE here: China’s MV drive sales drop in 2014 and 2015 Source: Automation.com
by admin | Jul 30, 2015 | Automation
AADvance meets the functional safety requirements for Safety Integrity Level 3 (SIL 3) and is compliant with IEC 61508: 2010, Parts 1-7. Read the FULL ARTICLE here: Rockwell releases AADvance Eurocard process safety system Source:...
by admin | Jul 30, 2015 | Automation
Both solution centers will facilitate training and support for local manufacturers in Wisconsin and the Mid-Atlantic regions, respectively. Read the FULL ARTICLE here: Hexagon Metrology opens offices in Milwaukee and Wilmington Source:...
by admin | Jul 29, 2015 | Automation
ISA and Beamex will co-host a free web seminar 1 September 2015 on how to calibrate temperature instruments. Read the FULL ARTICLE here: Web seminar: How to calibrate temperature instruments Source: Automation.com
by admin | Jul 29, 2015 | Automation
NEMA’s Electroindustry Business Conditions Index (EBCI) for current conditions in North America improved by more than 20 points, marking an abrupt change of direction following three consecutive months of decline. Read the FULL ARTICLE here: NEMA says Business...
by admin | Jul 29, 2015 | Automation
IntraVUE provides the capability to identify and report information critical to improving uptime of the Industrial Ethernet infrastructure. Read the FULL ARTICLE here: Panduit Acquires IntraVUE Network Diagnostic Software Source:...
by admin | Jul 29, 2015 | Automation
USB enabled motor controller is for use with DC servo motors that operate from three volts to twelve volts.. Price: $345. Read the FULL ARTICLE here: Ealing introduces USB enabled motor controller Source: Automation.com
by admin | Jul 29, 2015 | Automation
MS-9A75 is based on the 5th Gen Intel Broadwell ULT Core i5 Mini-ITX board. Read the FULL ARTICLE here: MSI announces MS-9A75 fanless computer Source: Automation.com
by admin | Jul 28, 2015 | Automation
By Edward Nugent, PcVue Inc., et al The different way in which mobile device users interact with their devices compared to operator’s interactions with control room monitors requires a new SCADA architecture for mobility workers who rely on SCADA or BMS systems in...
by admin | Jul 28, 2015 | Automation
By Edward Nugent, PcVue Inc., et al The different way in which mobile device users interact with their devices compared to operator’s interactions with control room monitors requires a new SCADA architecture for mobility workers who rely on SCADA or BMS systems in...
by admin | Jul 28, 2015 | Automation
Floodgate Security Manager provides security for IoT edge devices, including mobile, wireless, battery powered and mesh-based IoT sensors. Read the FULL ARTICLE here: Icon Labs Releases Security Management System Source: Automation.com
by admin | Jul 28, 2015 | Automation
AeroLink Protection on AWK-3131A automatically restores communications within 300ms of connection failure to help industrial wireless networks avoid interruptions. Read the FULL ARTICLE here: Moxa releases AWK-3131A Wireless Bridge Source:...
by admin | Jul 28, 2015 | Automation
AeroLink Protection on AWK-3131A automatically restores communications within 300ms of connection failure to help industrial wireless networks avoid interruptions. Read the FULL ARTICLE here: Moxa releases AWK-3131A Wireless Bridge Source:...
by admin | Jul 28, 2015 | Automation
Elster Division of Melrose Industries is a provider of thermal gas solutions for commercial, industrial, and residential heating systems and gas, water, and electricity meters. Read the FULL ARTICLE here: Honeywell To Acquire Elster for .1 billion Source:...
by admin | Jul 28, 2015 | Automation
Elster Division of Melrose Industries is a provider of thermal gas solutions for commercial, industrial, and residential heating systems and gas, water, and electricity meters. Read the FULL ARTICLE here: Honeywell To Acquire Elster for .1 billion Source:...
by admin | Jul 28, 2015 | Automation
TM100 is completely fanless and ventless, protecting the hardware from damage due to dust and other airborne debris. Read the FULL ARTICLE here: Logic Supply introduces TM100 thin client computer Source: Automation.com
by admin | Jul 28, 2015 | Automation
TM100 is completely fanless and ventless, protecting the hardware from damage due to dust and other airborne debris. Read the FULL ARTICLE here: Logic Supply introduces TM100 thin client computer Source: Automation.com
by admin | Jul 27, 2015 | Automation
By Bill Lydon, Editor Many users, systems integrators, and manufacturing managers expect one year to eighteen month Return on Investment (RIO) when replacing or adding new automation systems. I believe this is short sighted thinking. Short term ROI justification...
by admin | Jul 27, 2015 | Automation
By Dean Wiech, Tools4Ever Workflow and automation procedures for identity and password management can reduce time spent, increase security and reduce the workload on the help desk considerably. Read the FULL ARTICLE here: Workflow and Automation for Account and...
by admin | Jul 27, 2015 | Automation
Viscometer is certified to the latest ATEX, IECEx and TIIS (Japan) standards and is suitable for zone 1 or zone 2 uses, and is ETL listed for the USA and Canada Class 1 Div1 Group CD, depending on application. Read the FULL ARTICLE here: Icon Scientific releases safe...
by admin | Jul 27, 2015 | Automation
Salcan Process Technology uses the Rotork actuated control valve to control the flow of gas while maintaining back pressure in the coal seam. Read the FULL ARTICLE here: Rotork valve actuators control coal mine degassing Source:...
by admin | Jul 27, 2015 | Automation
Magnetek designs and manufactures digital power andmotion control solutions for material handling, elevators and mining applications. Read the FULL ARTICLE here: Columbus McKinnon to Acquire Magnetek Source: Automation.com
by admin | Jul 24, 2015 | Automation
BIS V can read three different frequencies of RFID tags and communicate via EtherNet/IP, Profinet, Profibus, CC-Link, or Ethercat. Read the FULL ARTICLE here: Balluff releases BIS V RFID reader Source: Automation.com
by admin | Jul 24, 2015 | Automation
Enhancements include a Report Center that delivers statistics about downloads and therefore important key figures for marketing and sales. Read the FULL ARTICLE here: EPLAN expands Data Portal for web service Source: Automation.com
by admin | Jul 24, 2015 | Automation
Exida established an office in Abu Dhabi, UAE Read the FULL ARTICLE here: Exida opens office in Middle East Source: Automation.com
by admin | Jul 24, 2015 | Automation
NSM-205GP has four Power-over-Ethernet Ethernet ports and one additional Ethernet/Fiber port. Read the FULL ARTICLE here: ICP DAS introduces NSM-205GP unmanaged PoE Ethernet Switch Source: Automation.com
by admin | Jul 24, 2015 | Automation
The hygienic connectors have an IP69K rating and meet EHEDG, 3A and FDA hygiene standards. Read the FULL ARTICLE here: B&R adds hygienic connections to its motors Source: Automation.com
by admin | Jul 23, 2015 | Automation
The PMQ9240, a 24-inch panel mount quad display monitor, supports 1920 x 1080 pixels full HD resolutions with 16.7 million colors, with an option for 800-nit sunlight readable display at a contrast ratio of 5000:1, allowing users to see a true representation of...
by admin | Jul 23, 2015 | Automation
Express-BL supports up to 32GB of dual channel DDR3L memory at 1600MHz and features Intel Iris Pro Graphics 6300 integrated in the processor. Read the FULL ARTICLE here: ADLINK announces Express-BL COM Express computer module Source:...
by admin | Jul 23, 2015 | Automation
The Filter Select program’s database of hydraulic fluid information now includes hydraulic fluids from Houghton International. Read the FULL ARTICLE here: Bosch Rexroth updates hydraulic Filter Select tool Source: Automation.com
by admin | Jul 23, 2015 | Automation
With pressure capability up to 5,000 psi, MX pumps can be used in both analytical and small-scale preparative HPLC separations. Read the FULL ARTICLE here: SSI introduces MX isocratic pumps for tough applications Source: Automation.com
by admin | Jul 23, 2015 | Automation
By Preston Reine, IHS With so many conflicting signs in the current economic environment, motor suppliers are reportedly uncertain as to how effective the recent and impending energy efficiency requirements will be. Read the FULL ARTICLE here: Low-voltage motor...
by admin | Jul 22, 2015 | Automation
By Georg Stieler, Stieler Technologie The Chinese market for Industrial Automation is growing much faster than other sectors of the Chinese economy and will almost double within the next five years, according to our estimations. Read the FULL ARTICLE here: Industrial...
by admin | Jul 22, 2015 | Automation
By John Morse, IHS Technology Despite the promotion and anticipated market growth of USB 3 cameras, they are forecast to account for only a quarter of USB camera revenues by 2019 Read the FULL ARTICLE here: What’s the future for USB 3 in machine vision? Source:...
by admin | Jul 22, 2015 | Automation
The USB-DIO24-CTR6 can be used in an assortment of USB-based embedded applications including light, motion, and process controls. Prices start at $104. Read the FULL ARTICLE here: ACCES I/O announces Model USB-DIO24-CTR6 digital I/O module Source:...
by admin | Jul 22, 2015 | Automation
The Wormhole module is intended for OEM integration of IEC 61131 Control into board level electronics. Read the FULL ARTICLE here: StratusIoTsolutions deploys Phoenix Contact Software in Wormhole Source: Automation.com
by admin | Jul 22, 2015 | Automation
Website visitors can explore parts and find machine tools used to cut specific parts for the automotive, aerospace and oil and energy industries. Read the FULL ARTICLE here: Okuma introduces interactive Industry Parts Viewer for CNC machine tools Source:...
by admin | Jul 21, 2015 | Automation
VIP Services (Virtual Information Portal) is a mobile maintenance app that was designed to improve efficiency, reduce downtime, attain Key Performance Indicators and increase productivity. Read the FULL ARTICLE here: Wunderlich-Malec Announces VIP Services Maintenance...
by admin | Jul 21, 2015 | Automation
The unnamed motherboards are based on Gen 2 AMD Embedded G-Series SoC processors. Read the FULL ARTICLE here: Congatech announces two Mini-ITX motherboards Source: Automation.com
by admin | Jul 21, 2015 | Automation
4G LTE multi-carrier cellular support for major North American carriers is now built into Sixnet series RAM and IndustrialPro cellular automation products. Read the FULL ARTICLE here: Red Lion Adds Multi-Carrier Capabilities to Sixnet Cellular Source:...
by admin | Jul 21, 2015 | Automation
The HEC-P5000 PLC now has cloud and cellular communications capability. Read the FULL ARTICLE here: Divelbiss enhances HEC-P5000 controllers Source: Automation.com